Silico manganese zirconium inoculant

Introduction:

Si-Mn-Zr inoculant contains zirconium, aluminum, calcium and other alloy elements that are easily combined with sulfur and oxygen, and the combination of these elements makes it more powerful in inoculation effect than traditional inoculants. The inoculant is particularly suitable for the large-scale use of scrap steel of gray cast iron and ductile cast iron, enhance the control of graphite morphology and reduce chill to optimize the mechanical properties of castings.

Send Email Inquiry Now

Product Introduction

The inoculant is particularly suitable for the large-scale use of scrap steel of gray cast iron and ductile cast iron, enhance the control of graphite morphology and reduce chill to optimize the mechanical properties of castings.

Performance and Features:

1
It can significantly reduce the chilling tendency, and lower the relative hardness, improve machinability;
2
Strong anti-recession ability, preventing inoculation recession and spheroidization recession;
3
It can improve section uniformity and reduce shrinkage tendency;
4
Stable chemical composition, uniform processing size, small deviation of composition and quality;
5
Low melting point (near 1300℃), easy to be absorbed during inoculation.

Parameter:

Grade	Si	Mn	Zr	C	Ca	Al	S	P
SiMnZr	70-78	1-2	1.5-2.5	≤0.5	0.5-1.5	0.5-1.5	≤0.02	≤0.05
SiMnZr	62-69	3-5	3-5	≤0.5	0.5-1.5	0.5-1.5	≤0.02	≤0.05
SiMnZr	62-69	5-8	5-8	≤0.5	0.5-1.5	1-1.5	≤0.02	≤0.05

Send Message

Hot Products

The main products include rare earth magnesium ferrosilicon alloy (spheroidizing agent), nucleating agent, pipe powder, ferrosilicon (particles), (high, medium and low) carbon manganese, (high, medium, low and micro) ferrochromium, alloy cored wire, silicon carbide, silicon nitride, slag onglomeration agent, desulfurizer, and carburant, as well as other customized alloy products.

Ferrosilicon

It is an essential deoxidizer in the steelmaking industry. In the steelmaking industry, ferrosilicon is used for precipitation deoxidation and diffusion deoxidation. It is also used as an alloying agent in steelmaking.

Ferrosilicon powder

It refers to an iron alloy composed of iron and silicon after grinding, which can be used as a deoxidizer in steelmaking and iron making, and used as a raw material for hydrogen production.

Rare Earth Magnesium Ferrosilicon Alloy

Rare earth magnesium ferrosilicon alloy, made of ferrosilicon, calcium, magnesium, rare earth and other materials by melting, is a spheroidizing agent with a strong deoxidation and desulfurization effect.

Vermiculize

Vermiculizer is an additive added to liquid iron to obtain vermicular graphite. There are many composite alloy vermiculizers containing various elements widely used, including rare earth-silicon-calcium, rare earth-magnesium-titanium, and rare earth-magnesium alloys.

Silicon barium calcium inoculant

Enhance the graphitization, greatly increase the amount of graphite nodules formed, refine the crystal particles, and improve the roundness of graphite nodules in the ductile iron.

Silicon strontium inoculant

The ability to reduce chilling is about 50% higher than that of ferrosilicon, and it has better fracture uniformity and anti-recession ability than those of ferrosilicon, without increasing the number of eutectic clusters. In addition, it dissolves easily and forms less slag.