Silicon manganese alloy

Introduction:

Silicon-manganese alloy is an alloy composed of Mn,Si, iron and a small amount of carbon and other elements. Wide use, high output. Its consumption ranks second in electric furnace ferroalloy products. Silicon Manganese is used as a deoxidizer and an alloying element in steel.

Send Email Inquiry Now

Introduction:

Product Application

SiMn is often used in steel mill production. The Mn and Si in the silicon-manganese alloy have a strong affinity for oxygen. The melting points of the deoxidized products MnSiO3 and Mn2SiO4 are 1270℃ and 1327℃, respectively. It has the advantages of low melting point, large particles, easy to float, and good deoxidation effect. Under the same conditions, when Mn or Si is used alone for deoxidation, the burning rate is 46% and 37%, respectively. With Silicon-manganese alloy deoxidation, the burning loss rate of the two is only 29%. Therefore, it has been widely used in steelmaking. The growth rate of SiMn output is higher than the average growth rate of ferroalloys and higher than that of steel. It has become an indispensable composite deoxidizer and alloy additive in the steel industry.

Specifications:

SiMn Grades	chemical component(%)
	Mn	Si	c	p			s
			c	Ⅰ	Ⅱ	Ⅲ	s
			≤
FeMn64Si27	60.0--67.0	25.0~28.0	0.5	0.10	0.15	0.25	0.04
FeMn67Si23	63.0--70.0	22.0~25.0	0.7	0.10	0.15	0.25	0.04
FeMn65Si17	65.0--67.0	15.0~17.0	2.0	0.10	0.15	0.25	0.04
FeMn60Si14	60.0--62.0	14.0~16.0	2.0	0.10	0.15	0.25	0.04
FeMn68Si18	65.0~72.0	17.30~20.0	1.8	0.10	0.15	0.25	0.04

Content and particle size can be processed and produced according to customer requirements

Send Message

Hot Products

The main products include rare earth magnesium ferrosilicon alloy (spheroidizing agent), nucleating agent, pipe powder, ferrosilicon (particles), (high, medium and low) carbon manganese, (high, medium, low and micro) ferrochromium, alloy cored wire, silicon carbide, silicon nitride, slag onglomeration agent, desulfurizer, and carburant, as well as other customized alloy products.

Alloy Cored Wire

It helps adjust and control the content of easily oxidized elements and trace elements, and can greatly increase the alloy yield, reduce smelting costs, shorten smelting time, and accurately control the composition.

Rare Earth Magnesium Ferrosilicon Alloy

Rare earth magnesium ferrosilicon alloy, made of ferrosilicon, calcium, magnesium, rare earth and other materials by melting, is a spheroidizing agent with a strong deoxidation and desulfurization effect.

Ferromanganese

Ferromanganese is an alloy composed of iron and manganese, which is an important auxiliary material for cast iron and steelmaking.

Ferrosilicon

It is an essential deoxidizer in the steelmaking industry. In the steelmaking industry, ferrosilicon is used for precipitation deoxidation and diffusion deoxidation. It is also used as an alloying agent in steelmaking.

Silicon strontium inoculant

The ability to reduce chilling is about 50% higher than that of ferrosilicon, and it has better fracture uniformity and anti-recession ability than those of ferrosilicon, without increasing the number of eutectic clusters. In addition, it dissolves easily and forms less slag.